HEAVY HAMMER CRUSHER

Product Performance

1. High crushing ratio, good particle shape: Large feed size, small discharge size, adjustable product granularity according to requirements, ensuring high compressive strength with no flakes or smooth bodies, and multiple angles and edges.
2. Low operating costs, minimal investment: The heavy hammer crusher achieves one-time shaping without the need for secondary crushing and shaping processes, resulting in low-cost operation that can reduce costs by around 40%.
3. Long service life: The hammer heads of the heavy hammer crusher can rotate 360°, increasing their elasticity, making them less prone to breakage when encountering large or slightly harder materials, thus extending the service life of the hammer heads.
4. Energy-saving, environmental protection, reduced pollution: The heavy hammer crusher can crush materials in both dry and wet forms. When crushing wet materials, water can be added to reduce dust pollution to the environment.

Working Principle

1. The heavy hammer crusher uses impact to crush materials. The main working component is a rotor with hammer heads, consisting of a main shaft, disc, pin shaft, and hammer heads. The motor drives the rotor to rotate at high speed in the crushing chamber. Materials enter the machine through the upper feed port and are crushed by the high-speed moving hammer heads through impact, collision, and grinding. At the bottom of the rotor, there is a sieve plate. Particles smaller than the sieve hole size are discharged through the sieve plate, while larger particles are retained on the sieve plate for further crushing and grinding by the hammer heads before being discharged through the sieve plate.

Technical Parameters